Qingdao Hailong Machinery Technology Co., Ltd. is one of the leading manufacturers and suppliers of replacement complete classic car body with custom color for ford bronco in China, featured by quality products and good service. Welcome to buy durable replacement complete classic car body with custom color for ford bronco made in China here and get pricelist from our factory. Also, customized service is available.
Ford Bronco
1966–1977
One shell.
Every piece.
Every 1966–77 Bronco starts the same way: a bare body shell that deserves better than patchwork repairs. We manufacture the panels and components that put a first-generation Bronco back together properly - fenders, floors, doors, grilles, and everything behind them.
Parts are grouped by model-year range so you can build a complete, correct truck - from a full rotisserie restoration down to a single bolt.
Body panels & sheet metal
- Front & rear fenders
- Quarter panels & patch panels
- Doors, hoods & tailgates
- Floor pans & rocker panels
Grilles & front end
- Grilles & grille shells
- Headlight bezels & buckets
- Valance & core support panels
- Hood hinges & latches
Bumpers & guards
- Front & rear bumpers
- Brush guards & grille guards
- Bumper brackets & hardware
- Tow hooks & mounts
Tops & weatherstripping
- Hardtops & roof rails
- Soft tops & door skins
- Weatherstrip & seal kits
- Tailgate seals & gaskets
Interior & trim
- Dash pads & instrument trim
- Door panels & armrests
- Seat covers & upholstery
- Floor mats & cargo trim
Glass & lighting
- Windshields & side glass
- Headlamps, tail & signal lamps
- Bezel & lens sets
- Wiring & harness repair parts
Suspension & steering
- Coil springs & leaf packs
- Control arms & bushings
- Tie rods & steering boxes
- Shocks & sway-bar kits
Brake systems
- Disc-conversion kits
- Drums, rotors & calipers
- Boosters & master cylinders
- Brake lines & hardware
Drivetrain & engine
- Engine mounts & brackets
- Radiators & cooling parts
- Drivelines & flanges
- Differential & axle hardware
Hardware & supplies
- Bolts, clips & fasteners
- Seam sealers & adhesives
- Rust treatment & etch primer
- Panel adhesives & tapes
Fitment by year
Body and front-end panels are year-range specific. Match your Bronco below, then confirm against its build date before ordering.
| Years | Front end & grille | Fenders & body | Notes |
|---|---|---|---|
| 1966–68 | Early-style grille and separate headlight bezels | Narrow front fenders; non-flared rear quarters | 289 V8 optional from March 1966; Roadster built through 1968 |
| 1969–72 | Revised grille and front-end trim | Narrow fenders carry over | 302 V8 from 1969; U14 Half-Cab continues |
| 1973–74 | Wider restyled front end | Flat fender flares added; body widened | 200 cu-in six standard; four-wheel disc conversions popular |
| 1975–77 | Restyled front end continues | Radius-cut front fenders; flared rear quarters | Final model years of the first generation |
Running changes happened within model years. When in doubt, send us your Bronco's VIN or build date with your order - we will confirm the correct part.
The shell, in detail
Click any image to enlarge. A refinished 66–77 Bronco shell as the starting point for a full build.
Hot Tags: replacement complete classic car body with custom color for ford bronco, China replacement complete classic car body with custom color for ford bronco manufacturers, suppliers, factory
